Through a specific internal configuration, air is drawn into the showerhead; the external air pressure effectively boosts the flow rate without requiring additional water volume. These pressure-boosting showerheads utilize the principle of variable-diameter flow acceleration. Even with high mains water pressure, the spray does not sting the skin; the combination of 0.2mm nozzle apertures and over a hundred holes disperses the pressure as the water passes through the spray face, resulting in a naturally soft, gentle stream. By pressurizing the water before it reaches the mixing valve, the system ensures maximum stability in temperature, pressure, and flow rate, effectively eliminating sudden fluctuations between hot and cold.
As the water enters the showerhead base, it is forced through a three-vane accelerator that creates a swirling motion, thereby increasing flow velocity and impact force. It then flows into a restriction channel where it mixes with air, increasing the oxygen content tenfold. The showerhead features intelligent flow regulation that automatically adjusts the water intake area based on pressure levels; when pressure is low, the intake area expands to balance the flow, achieving both pressure boosting and water conservation. By automatically modulating the intake area in response to pressure-opening wider when pressure is low-the system balances the output flow and successfully achieves the goal of increased pressure.